Intelligent Photocell Single Point

Thanks to the Photocell Advance function, these daylight sensors can built inside the fixture completely. The fixture is effectively controlled by the daylight sensor, automatic on/off operation based upon daylight.

Photocell Advance Version with Remote Control

Thanks to the Photocell Advance function, these daylight sensors can built inside the fixture completely. The fixture is effectively controlled by the daylight sensor, automatic on/off operation based upon daylight.

Usage suitability – corridors / washrooms / lobbies etc.

  • Works from behind the fixture cover / diffuser.
  • Commissioning via HRC-11 remote.
  • Built into the fitting and can be used internally.
  • DS06 photocell.
  • As above but with daylight harvest functionality.
  • Needs to be used in conjunction with a 1-10v driver.
  • Can be used in a master slave configuration (wired).
  • Usage suitability – corridors / washrooms / lobbies etc.
  • Where ambient light is available during daylight hours.
  • User commissioning.
With insufficient natural light, the light switches on at 100%.
The light turns off completely whenever natural light reaches above pre-set daylight threshold.
The light automatically turns on at 100% when natural light lux level drops below pre-set daylight threshold.
The light turns on at full or dims to maintain the lux level. The light output regulates according to the level of natural light available.
The light dims to minimum level then switches off when natural light is sufficient.
The light automatically switches on when natural light is insufficient.